A jointer planer combo is a combination of a wood jointer and a wood planer in one machine. One of the biggest problem faced by home owners turned DIYers or hobbyist is limited workshop/garage space.
Professional woodworkers usually have a dedicated workshop space for carrying out their projects. As a result of this, they can afford to purchase and bring in as many woodworking machines as they need and can afford, because they have all the space for those machines.
The same cannot be said for a simple hobbyist or DIYer who is just looking to make some of those never ending projects he or she discovers on Pinterest and YouTube.
As an average hobbyist, you normally make use of the leftover space in your garage where you still happen to pack your car.
This is not enough to accommodate the numerous woodworking tools you need to get your projects going. Hence, the need for machines like the jointer planer that houses two machines in one.
With it, you can achieve the two tasks which are jointing and planing with just one machine.
Jointer planers also offer you a wide jointing capacity because the wide planer cutterhead is also acting as the jointer cutterhead. So, you have the ability to joint boards that are wider with it.
In addition, since it’s just one cutterhead in the machine for both jointing and planing, it saves you the cost and worries of maintain two cutterheads on two different machines.
In this article, we will be talking about some of the best jointer planer combo machines out there. But the first question that must be considered is this. Should you get a jointer planer combo machine?
Should you get a jointer planer combo?
From what I’ve said above, the advantages of getting a jointer planer is quite obvious. However, along with these advantages, they come with their own drawbacks.
Many users have noticed this and have not been silent concerning this. This you can notice from the low reviews they have in many of the online market places.
One of the major drawback is that some of them can be a little bit difficult to switch between modes i.e from planing to jointing and vice versa. Thus, increasing downtime.
Changing between modes can also cause parts of the machine to lose alignment. For instance, the jointer fence might lose it’s squareness after changing from the planing mode to the jointing mode. Then you have to adjust it all over again.
This is not to discourage you from getting it though. The point is, if you are about to get one, then you must be aware of some of the possible limitations of this machine.
It’s all a matter of personal preference and it’s totally up to you. Personally, I would rather get a separate wood jointer and a separate wood planer machine, because I think they work more effective separately. Plus you don’t have to keep switching whenever you want to plane or joint. It’s kind of not my thing.
Nonetheless, if you are ready for all that switching modes thingy, it’s a good power tool that can really help you to optimize your workshop space, effectively helping you to kill two birds with one stone.
With that said, below is a comparison table of some of some of the best jointer planers you can check out right now.
Jointer Planer Combo – Best Picks
|Jointer Planer||Max Cut|
|12 inch||5500 RPM|
|Grizzly G0675||10 inch|
|Rikon 25-010||10 inch||14,400 cuts/min|
|Jet JJP-10BTOS||10 inch||18,000 cuts/min|
|Jet JJP-8BT||8 inch||18,000 cuts/min|
Now, with that aside, here is our thorough review of the best jointer planer machines you can get today.
Jet JJP-12 Jointer Planer Combo
In terms of capacity, the JET JJP-12 jointer planer is capable of planing and jointing boards as wide as 12 inches.
As far as jointer planers go, this one is the most versatile one around.
Talking about power, the JJP-12 is not lacking either.
It comes with a powerful 3 horse power motor which powers the cutterhead during both modes of the machine, which is jointing and planing.
The motor also powers the feed roller system when being used as a planer.
To protect the motor from damage due to variance in electrical power, JET saw it fit to include a magnetic ON and OFF switch.
This prevents the jointer planer from restarting on it’s own, in case the power goes off and comes back on again. This is a very good safety mechanism that protects the motor and you.
The three-knife cutterhead is a plus for the JET-12 jointer planer. It is 2 ¾” in diameter and it powers both the jointing and planing operiation.
As a planer, the JET-12 jointer planer is capable of planing boards up to 12 inches wide and 8 ¾ inches thick. It has a maximum cut depth of 1/8 inches for wide stocks and 5/32” for narrow stocks.
When being used as a jointer, it is capable of handling the same board sizes as when it is used as a planer, 12 inch wide boards. The maximum cut depth is also 1/8 inches.
It has a 43” long by 6” tall fence for an accurate jointing process. The fences can easily be adjusted to care for material width, and they can turned between 0 and 45 degrees to produce clean bevel cuts.
What I like about it
Changing from jointing to planing modes or from planing to jointing modes is very quick and easy with the JET JJP-12 jointer planer. This is something I really like about it.
You don’t have to remove any of the machine components when changing modes. Just with the aid of a pair of locking levers on the side, the JET JJP-12 can easily be switched from a jointer to a planer and from a planer to a jointer.
I also like the large capacity of the jointer planer. If you work with wide boards, then I’m sure you’re going to love the JET JJP-12 because of the size of boards it can accommodate.
It is also very powerful.
The 3 HP motor is able to handle any kind of wood thrown at it without flicking. I really like the fact that you can really joint and plane dense hard wood with it.
I also like the fact that the jointer infeed and outfeed table are easy to adjust and they stay the same way ones you’re adjusted them the first time.
As far as maintenance go, the JET JJP-12 is very easy to maintain because all the parts are easily accessible just by removing a large panel at the rear of the cabinet. It’s very easy to access the cutterhead, and you can easily change the blades if you want to.
The jointer fence is made of aluminum, which I think is not as solid as steel. I think a change from aluminum to steel would provide a more solid support for the work piece during jointing, and it will prove to be a better fit for the JET JJP-12 jointer planer.
Final Verdict On The Jet JJP-12
The JET JJP-12 jointer planer is one of the best machines out there that can function as a jointer as well as a planer. This is two machines in one, so if you’re worried about the amount of space in your workshop, then the JET JJP-12 is the right option for you, because it saves a lot of space. It is powerful, it accurate when set properly, and it has a huge capacity for planing and jointing wide boards. It is also fairly priced, so I think you wouldn’t go wrong if you decide to buy it.
Rikon 25-010 10 Inch Jointer Planer
The Rikon 25-010 jointer planer comprise a cutter head with a 2-1/2 diameter and knives which spin at a speed of 4800 RPM and delivers 14,400 cuts every minute of its spin. The fence extrusion is made of very strong aluminum which can be tilted to an angle of 45 degrees and it can also be quickly to 90 degrees with the aid of a simple adjustable knob.
The outfeed table can easily be removed with easy to operate flip levers when changing from jointing mode to planing mode. To remove the fence, simply turn the spring operating lever.
The dimension of the infeed and outfeed tables are both 19-3/4 inch. The Rikon 25-010 jointer planer combo is a very powerful jointer planer combination and it’s a suitable addition to any wood working workshop.
Jet JJP-10BTOS Benchtop Jointer Planer Combo
The Jet JJP-10BTOS 10-inch Benchtop Jointer Planer combo is one of the best jointer planers you can ever get your hands on. It packs a lot of special features which are usually found only on big floor models.
Here are some of the many features you need to know about the Jet JJP-10BTOS.
Here are some of the features of the JJP-10BTOS 10-inch benchtop planer combination.
Jet JJP-10BTOS 10-iche Benchtop Jointer Planer combo is designed in a special way to maximize space but not to lack on efficiency. With this jointer planer combo in your home workshop, you save the space for two machines, because it is both a benchtop planer and a benchtop jointer in one machine.
Also, you don’t have to worry about the precision of this jointer planer because the jointing and planing tables are both locked which guarantee that the machine will produce a very fine and precise cut every time.
Fast Speeds and a Variety of Cutting Depths for Versatility
What better jointer planer combo machine will you rather have than one with a very good cutting speed? The Jet JJP-10BTOS comes with a cutting speed of 18000 c.p.m, and it has a maximum cutting width of 10 inches.
The Jet JJP-10BTOS 10-Inch benchtop Jointer Planer is a very versatile machine. That is why it is able to handle any kind of wood working job whether big or small. It boasts a jointer maximum cut depth of 1/8 inch and a planer maximum cut depth of 0.08 inch.
It can also be easily transformed from a benchtop planer to a standing configuration in order to suit the user in whatever task it is needed for.
Powerful 13 Amp Motor and Two High-Speed Knives
In terms of power, the JJP-10BTOS jointer planer combo is up to the task. It comprise a 13 amp motor which provides steady performance for different kind of cutting operations. It also comprises two high-speed steel knives which are used for making cuts and they are very precise and smooth.
Stable and Accurate Jointing and Planing
The machine consists of a very strong and accurate extruded fence which can be angled up to a 45 degrees direction to produce a very accurate and stable jointing process. In addition, the planer is also equipped with a scale and pointer which helps to indicate the distance between the cutter head and the planer table, to ensure a very accurate work. There’s also cord wrap which is used to ensure that there are no dangling plugs and wires in order to prevent accidents.
Long Outfeed Table
The JJP-10BTOS benchtop jointer planer combo includes a long sheet metal outfeed table equipped with height adjustment which ensures that the jointer planer can handle different lengths of materials.
The Jet JJP-8BT 8-Inch benchtop jointer planer combo have same features as the Jet JJP- 10BTOS 10-Inch benchtop jointer planer combo but it’s different in terms of it’s cutting width.
While the former has a cutting width of 10, the JJP-8BT boasts an 8 inch cutting width.
However, like the former, if you’ve got a small workshop with a very limited space and you are looking for a portable jointer and planer combo to handle your jointing and planing jobs, then the Jet JJP-8BT is a very good choice.
It is equipped with features which are only available on big floor models. It consists of a powerful 13 amp motor just like the Jet JJP- 10BTOS and precision adjustment knobs. This and other high profile features associated with the Jet JJp-8BT makes it one of the best benchtop jointer planer combos you can get your hands on.
What to look for in a jointer planer combo
The video below explains thoroughly what you should look for when shopping for a jointer/planer combo machine. So, watch it if you want to learn more about these machines.