The porter cable planer is one very good planing tool that will serve you well if you are in need of a very good planer to add to your woodwork shop.
One look at many of the planer tools out there, and you might end up confused trying to choose the right one to bring into your workshop. So if you are not sure about which planer to buy or if you are on a low budget, then this porter cable planer review will serve you well.
This is because we will be exploring two porter cable planers and the features of each one of them in order to help you decide if they are worth your hard-earned money.
Porter Cable PC305TP 15 Amp 12 Inch Thickness Planer
The 15 amp 12-inch porter cable planer is basically a refined and rebranded version of the Delta planer.
The 15 amp 12-inch porter cable thickness planer is a very good, valuable and yet affordable asset for any small woodworking shop. It is portable and works extremely well in reclaiming old boards as well as new ones.
It comes with a powerful 15 amp motor that cuts quick and smooth through hard boards. It does not make a lot of noise when working, therefore will not disturb your neighborhood when in use. It also comes with blades with indexing holes or notches which have replaced earlier benchtop planer blades that require blade replacement jigs to replace the blades.
The blades that come with this portal cable planer are also double sided. That means when one side gets blunts, you can just take them off the cutter head and flip over to the other sharp end and they will just work like new blades.
To easily raise or lower the blades, the 15 Amp planer comes equipped with a cranking mechanism which you will find very useful during operation. The only disadvantage of using this porter cable planer is that it produces snipes in both ends of the board being planed.
To address the issue of snipe, you have support your lumber when feeding it into the machine, and support it when it’s coming out on the other side. With proper support, you can be sure that there’ll be no snipe.
Watch the Porter Cable PC305TP 12.5″ Planer Review
Porter Cable Planer -PC60THP 6 Amp Hand Planer
The PC60THP portal cable planer is a hand planer which is characterized by a heavy-duty 6 amp motor. This enables it to cut easily and smoothly through hard materials.
It has a maximum no load speed of 16,500 rmp. As a result, it is very efficient in cutting through different materials smoothly and producing a very good and smooth texture on the material.
The PC60THP portal cable planer consists of two dust extraction units, one at each side of the planer. This allows for flexibility when working with the planer, because you can place the dust extraction on whichever side that’s suitable for you in order to keep your work area as clean and tidy as possible.
There’s an over mold depth knob which offers 10 positive steps. This provides a better way to control the planer easily and also provides multiple depth control settings for producing even better finishes. There are also 3 chamfering grooves which provide good options for edge chamfering.
The PC60THP porter cable planer also has an 11.5 inch cast aluminum show which helps to provide additional control and better finish quality, while the 5/64 inch depth cut helps to remove excess wood material in a very small time. It’s also equipped with a 47-inch rabbit depth which aids in removing more material in every pass.
Here is what comes with the package when you order the PC60THP Porter Cable Planer from Amazon.
- PC60THP hand planer
- 2 Carbide cutting blades
- 1 Wrench
- 1 dust bag
- 1 Edge guide
- 1 Kit bag
Porter cable planers are very useful and cost-effective addition to any wood shop. If you looking for a hand planer, then the Porter-Cable PC60THP 6-Amp Hand Planer will do just fine. If not, then you can really get a lot done with the 15 amp porter cable benchtop planer.